Dry Mixed Mortar Production Line
The structure of Dry Mixed Mortar Production Line:
Dry mortar production line is mainly composed of elevator, premixed hopper, small hopper, mixer, finished product hopper, packing machine, dust collector, electric control cabinet, gas phase equilibrium system. Material with large cement proportion can be fed into premixed hopper by artificial measurement after elevator, fiber, rubber powder and other small proportion precious masterbatch can be fed through the electronic scale metering into admixture hopper, mortar finished product after mixing by the mixer, through the valve bag packaging machine or open bag packing machine for automatic weighing packaging. According to the need to use the belt conveyor to carry mortar finished product to the finished product accumulation zone. The production has the advantages of moderate investment, short construction period, investment, quick effect, etc. Equipment general capacity can be up to 5-15 tons per hour. Workers of 3-5, equipment 6-10 meters high, covers an area of 20-30 square meters.
The Clarification of Dry Mixed Mortar Production Line:
Dry mortar production line is mainly divided into semi-automatic and complete automatic two types. Semi-automatic type is mainly composed of zero-gravity mixing machine (with fly knife), finished product bin, packaging machine, bucket elevator, for mixing silo, filter, air compressor system, control system, etc. The product line is high capacity, good working environment, good expanding possibility, suitable for most investors.
Automatic type is mainly composed of efficient hybrid system, the loading system, transmission system, lift system, weighing system, mixing system, packaging systems, dust removal system, material level control system, alarm system, air compressor system, the machine control system. According to need to do another crushing system and drying system. The equipment is high intelligent degree, simple man-machine dialogue, while improve efficacy, unit energy consumption and labor costs significantly reduced. For more than medium-sized enterprises production. The line is recommended based good large and medium-sized cities built in the wall heat preservation.
Complete Set of Equipments for Dry Mixed Mortar Production Line:
Annual output of twenty thousand tons of cement mortar production line, usually use 3-6 raw material tank, two of the big cans for bulk cement and fly ash, the rest of the small cans for put light calcium, coarse whiting, sand, small material, etc. Bulk cement and fly ash into the pot does not need to increase equipment, pump truck into. Bulk generally fly ash storehouse to the drum support structure, the upper dust removal equipment, prevent dust leakage and lower arch breaker is equipped with, prevent powder agglomeration, make the powder discharge smoothly, and is equipped with material level sensor equipment, may at any time use of warehouse material inside.